Zeta Black interior wip

zent · Post by **zent** » Thu Mar 08, 2007 8:02 pm

Hello
This is first project with kray 1.7, and I must say im excited. I used brute GI for this one at the highest settings. The fg max and min where very low only 100 by 2000. This is a wip as you can see some objects are not textured.

I am very new to kray and have many questions. For some reason Kray will give me a unexpected error message. this is random and I cant solve it. All of my geometry has been checked. The total polygon count is a bit over a million, and I use large texture maps. It seems kray will not render any image map over 2000 by 2000.

Thanks for the help in advance.

Post by **jure** » Thu Mar 08, 2007 8:11 pm

Hey Zent!

Impressive work! Love the kitchen design...

About unexpected exception:

As you allready discovered there is a bug currently that leaks memory when large textures are used. This is allready been worked on and is going to be fixed soon.

zent · Post by **zent** » Thu Mar 08, 2007 8:50 pm

Thanks Jure for the help and your very kind comments

Its means alot. About the texture issue, is there a set resolution you suggest. I normally use 3000x 3000 but should I use 1200-1200?
Thanks
Chris

3dworks · Post by **3dworks** » Thu Mar 08, 2007 9:31 pm

very nice!

markus

Post by **jure** » Fri Mar 09, 2007 10:03 am

zent wrote:Thanks Jure for the help and your very kind comments Its means alot. About the texture issue, is there a set resolution you suggest. I normally use 3000x 3000 but should I use 1200-1200?
Thanks
Chris

In my tests i had to keep images below 2000x2000 to work...

zent · Post by **zent** » Fri Mar 09, 2007 7:41 pm

Thank you 3dworks!
Thanks Jure for the help. 2000X2000 should be enough for mos scenes anyway.

Janusz Biela · Post by **Janusz Biela** » Fri Mar 09, 2007 8:46 pm

Zent Nice work!!

zent · Post by **zent** » Sat Mar 10, 2007 1:02 am

Thanks Johny!

zent · Post by **zent** » Sat Mar 10, 2007 7:07 am

Here is another wip, This image has some problems that I could use some advice to take care of.

1. I'm not sure I am using the best glass settings.
2. I'm having trouble texturing the faucet.
3. I have a glass reflection error on the left side cabinet door.

Lastly I need advice on AA.
Thanks

Janusz Biela · Post by **Janusz Biela** » Sat Mar 10, 2007 4:31 pm

zent wrote:Here is another wip, This image has some problems that I could use some advice to take care of.

1. I'm not sure I am using the best glass settings.
2. I'm having trouble texturing the faucet.
3. I have a glass reflection error on the left side cabinet door.

Lastly I need advice on AA.
Thanks

Glass:

zent · Post by **zent** » Wed Mar 14, 2007 3:56 pm

Thanks Johny for the glass help. Here is my final wip before I do my final renders. I need some advice on the fg settings for qmc rendering. I have noise after 7 hours. And I am getting weird reflections on my chrome faucet. Finally still haveing AA problems Any suggestions?
Thanks
Chris

Janusz Biela · Post by **Janusz Biela** » Wed Mar 14, 2007 6:07 pm

Very long time render

My best setup AA. Use later PS to Shrap (High Pass filter in layer)

PrintF · Post by **PrintF** » Thu Mar 15, 2007 1:38 am

zent wrote:Thanks Johny for the glass help. Here is my final wip before I do my final renders. I need some advice on the fg settings for qmc rendering. I have noise after 7 hours. And I am getting weird reflections on my chrome faucet. Finally still haveing AA problems Any suggestions?
Thanks
Chris

why QMC??? in this render-scene You can use Cache for saving time render!

Menu

My account

Kray Tracing Account

Zeta Black interior wip

Zeta Black interior wip